Original Xecuter TX Corona CPU Postfix Adapter for All XBOX360 Motherboard

Description:
Needed for Microsoft Xbox 360 Corona v3, v4 and some late V2.
 
All new Xbox 360 manufactured on August 2012 and later are impossible to reflash without RGH. DGX is a must have to do the RGH on those new consoles without post_out. DGX is a must have to do the RGH on updated consoles.

There are now Corona v3 & v4 Xbox 360 Slim motherboards with removed post_out tracks and points normally used

The only way to connect the CPU_RST wire is to solder directly to the post_out ball on the CPU itself

The postfix is an elegant solution from Team Xecuter that avoids having to solder directly to the ball of the CPU. The Xecuter Corona Postfix adapter is a neat little PCB board that sits around the CPU and using a special pogo pin system to connect to the ball of the CPU and avoids having to solder the CPU_RST wire to the post_out ball of the CPU.

With this TX Postfix you don not need to run the wire to the ball on the CPU!

Features:
Easy install to any Corona v3 or Corona v4 motherboard that has the POST OUT removed. Simply remove the heatsink using the XECUTER XCLAMP TOOL, clip on the adapter and you now have a perfect install point for your POST – enabling you to use your CR again.

No need to solder underneath the CPU or to chop up your motherboard. Yet another elegant solution from Team Xecuter.

Item:
1* Original Xecuter TX Corona CPU Postfix Adapter for All XBOX360 Motherboard