NDSi NDSIi LL/XL 2in1 Induction Charging Pad

NDSi NDSIi LL/XL 2in1 Induction Charging Pad

Introduction :
This product is a no-contact charge design; specifically for NDSI / NDSI LL design of a non-contact inductive charging / battery; traditional charging by contact electrodes, contact form, contact easily oxidized, for fear tide, spring easily lead to poor contact fatigue life is short, prone to failure and other shortcomings; such as using non-contact charging, the above shortcomings have no need to worry! This product is no need to charge the battery when charging out from the host, remove the replacement battery trouble, since the products with more convenient and simple!

Product Features:
1. NDSI or NDSI LL with original power supply power supply charge!
2. Using a combination of winding compensation technology advanced, waveform distortion.
3. Using microcomputer control thyristor, switch combinations timely compensation adjustment to achieve a rapid non-contact conditioning. Instantaneous overload strong!
4. Voltage adjustment process, no distortion, no instantaneous power failure phenomenon, the charge can be completely saturated!
5. Microprocessor controlled charging, charging, stable performance, charging time of about 4 hours to complete!
6. The new design of dual-use multi-sensor cell (NDSI / NDSI LL) for charging, charging, no need to remove the battery from the host to use!
7. The new design of dual-use battery (NDSI / NDSI LL), durable!
8. Electromagnetic radiation is low, the human body without harm!

What products contain independent parts?
1.NISI/NDSI LL sensor battery ? 1PCS
2.DI more induction charge ? 1PCS
3.NDSI LL battery add-? 1PCS

What products are suitable for the host?
1.NDSI host
2.NDSI LL Host

User Manual :
1. Input voltage: DC5V or NDSI / NDSI LL original power supply)
2. Charging current: about 500mA
3.LED charging indicator
3.1. The first LED-powered light, as light is after power, into the charging status.
3.2. Charging the second, third, four LED displayed for the Marquee (such as mobile phone charging battery indicator)
3.3. Charge saturation, the second, third and four LED to light is displayed.

Battery
1. Battery Type: Lithium Battery
2. Charging: Magnetic inductive charging
3. Battery Capacity: 850mAh
4. Charging time: about 4 hours to complete the charging
5. Battery: ? 4 hours

Use these steps:
NDSI host charged
1. The original batteries or DC5V power supply directly connected to induction charging, induction charging source then switch to "ON" Department
2. The first step; will NDSI host battery cover is open, right put into the sensor cell, covered with the host back cover, place the system can be induced charge on the charge. (Display host, as illustrated by the placement of display)
NDSI LL host charged
1. The original batteries or DC5V power supply directly connected to induction charging, induction charging source then switch to "ON" Department
2. The first step; will NDSI LL hosts open the battery cover, then NDSI LL battery add-in cards put into the battery (see the figure). Complete package can be put into the NDSI LL host. Cover the host back cover, place the system can be induced charge on the charge! (Display host, as illustrated by the placement of swing)